-17%
In stock

Pretend Play Creative Fingerprint Money Box ATM Password Save Electronic Money Box For Paper Money Cartoon Baby Piggy Bank Toy For Kids

Specifications:

  • Material: ABS
  • Color: Blue/Red
  • Size: 13.5×11.5x20cm
  • Package size:14x12x21cm
  • Battery:3×1.5v 3xAA Battery(Not included)

2,650.00

Safe manual:
“My own safe” guards my stuff. It can be used to store toy jewelry, baseball cards, etc. The coin hole in the coin slot can put coins into it like a small piggy bank can also put banknotes.
Please install the battery before use. 3 “AA” batteries (FREE Batteries)
Note: 1. Please use a new battery, it is recommended to use the size and specifications required by the safe.
2. Do not mix new and old batteries.
3. Never mix alkaline batteries with other types of batteries.
4. If you plan not to use the safe for several weeks, remove the battery. Chemicals leaking from batteries can damage electronic parts.
Instructions:
To open the safe, you first need to enter a four-digit password. The default password of the safe is 0000.

Follow the steps below to use the safe:
Enter the 4-digit password and the green light will come on. If you enter the wrong password, the red light will be on, and the sound of “PLEASE TRY AGAIN” will tell you.
Turn the knob clockwise to open the door. When the green light is on for about 10 seconds, you will hear a creaking door open. If the door is open for more than 10 seconds, the green light goes out and a buzzer sounds, beeping every 20 seconds. To stop the beep, just close the door.
Put the paper money into the paper money port, the paper money can be directly entered. Then press the password to withdraw money directly.
When you are finished, close the door and lock it.

To change the password, follow the steps below:
Enter the current password (default 0000) to open the safe door.
Long press the “*” button, the green light and red flash.
Enter the new 4-digit password within 15 seconds and press “#” to confirm storing the new password. The two lights stop flashing.
Note: If the new password is not entered within 15 seconds, the program will stop and the program must be restarted.
Release the “*” key and close the door.
Beep or talk

Enter the current password and open the door.
Push the switch (back side of the door) to the left or right to set the beep or speak.